What slides/samples are compatible with the system?
The Nanoimager works optimally with #1.5H coverslips, which have 170µm thickness.
The most popular chambers are:
ibidi (µ-Slide 8 Well Glass Bottom, No. 1.5) ]
Lab-Tek (Nunc™ Lab-Tek™ II Chambered cover-glass, No. 1.5)
35 mm petri dishes with #1.5 cover-glass bottom
Sample chambers/coverslips must be less than 97mm long, 35mm wide and 13mm in height.
Related Articles
Release Note: CODI & CODI System App
July 2025 Update with CSA 1.0.21 July 28, 2025 This release contains big updates across CODI! We’re rolling out support for AutoLNP on Aplo Scope, enabling 3x more data from your LNP Profiler kit to be acquired thanks to the large, homogeneous field ...
Connect To Microscope
The microscope can be connected via the ONI software called NimOS : Click on Acquire, and then click on Connect To Microscope: In the pop-up window, click on Confirm And Connect to proceed with the connection: Wait for the initialization to finish. ...
What is the heat dissipation of the system?
The whole system should run on average at 1000 BTU/hr and a maximum at 1500 BTU/hr. It is in the end a very small system and it does not run with a lot of Watts.
FAQ
What slides/samples are compatible with the system? The Nanoimager works optimally with #1.5H coverslips, which have 170µm thickness. The most popular chambers are: ibidi (µ-Slide 8 Well Glass Bottom, No. 1.5) ] Lab-Tek (Nunc™ Lab-Tek™ II Chambered ...
Routine Maintenance
While very low maintenance is necessary for your Nanoimager, it is worth checking for defects at regular intervals. Cables Check cables and plugs for defects. Objective Cleaning Take extra care when cleaning the objective lens and always use lens ...